C70600 Copper Nickel Tubes

CuNi30Mn1Fe CuNi10Fe1Mn

Copper Nickel tubes Standard have ASTM B111 BS2871 AND DIN1785

Copper-Nickel tubes C71500, C70600, CuNi30Mn1Fe, CuNi10Fe1Mn

Copper-Nickel tubes C71500, C70600 Standard establishes the requirements for seamless tube and ferrule stock of copper and various copper alloys up to 3 Vs in. [80 mm] inclusive, in diameter, for use in surface condensers, evaporators, and heat exchangers. The following coppers and copper alloys are specified:

此博客中的热门博文

Hard Chrome Plated Bar - CTStubes

CTS provides hard chrome plated bar. Send your inquiry to cts@ctstubes.com. What is hard chrome plated? Hard chrome plating is an electroplating process in which chromium is deposited from a chromic acid solution . Various types of hard chrome include micro-cracked chromium, micro-porous chromium, porous chromium, and crack-free chrome Thickness of hard chrome plating ranges from 2 to 250µm. What is a chrome-plated bar? Chrome-plated bars and tubes are primarily used as piston rods, a critical component in hydraulic cylinders . The essential function of transforming hydraulic power to a linear motion while preventing the ingress of abrasive media into the hydraulic system will stipulate a set of demands on the rod.

阅读全文

S35C Seamless Tubes CTSTUBES

Still looking for S35C tubes? Contact cts@ctstubes.com for a quick quotation.

阅读全文

Tube Straightness Inspection

The inspection of tube straightness. If straightness is required for, e.g., 0.5:1000, set three tolerance gauges in the middle and at both ends. Rotate the tube while observing its straightness through the gauges. It's more accurate, standardized, and efficient than measuring only with a ruler by hand. Check ctstubes.com for more.

阅读全文

CTS tubes

搜索此博客